Advanced twin filter half mask that combines high level comfort and
protection.
Large diameter valves create low breathing resistance and significantly
reduce wearer fatigue
Latex and silicone-free to ensure no allergic skin reaction
or irritation
Head harness and neck buckle support the mask comfortably without
feeling tightness in the straps
Spark, splash and contaminant guards for filters and exhalation
valve
Hygiene storage bag supplied with every mask
Size - adult S, M & L (medium fits most adult faces)
£24.95
+
Postage (£3.95 for the 1st mask then £2.95/additional
mask)
We
use PayPal's quick, easy and secure online payment
system
SAFETY INFORMATION
Must be used with the correct
P3 filter (as supplied) in order to provide robust protection against
airborne particles.
Filters should be disposed of as controlled waste immediately after
being used in a contaminated environment.
Filtering performance dependent on wearer achieving a properly sealed
tight fit. Do not use with beards or other facial hair that may inhibit
contact between the face and the edge of the respirator.
Respirator should be disinfected after being used in a contaminated
environment. Sanitize hands as a final step to help reduce the chances
of cross-contamination.
ADDITIONAL PROTECTION OPTIONS
The Profile accepts a wide
range of highly efficient particulate, gas and combined filters to
provide respiratory protection for many different hazardous environments
- please contact us
for more information.
ADDITIONAL INFORMATION
Standards
This product has been tested to the relevant European Standards and
has the following approvals:
CE 0121. EN 140:1998
EN 14387:2004
EN 143:2000
Recommended Use
These respirators do not supply oxygen. Do not use in oxygen
deficient atmospheres
Do not use this respiratory protection against fine particles
unless fitted with a P3 filter. Wearing the respirator without
the correct filter will render the device ineffective
Do not modify or alter this device
The assembled respirator may not provide a satisfactory face
seal with certain physical characteristics (such as beards and
side burns) resulting in leakage between the face piece and the
face, the user assumes all risks of bodily injury which may possibly
result
Store this device in a sealed container away from contaminated
areas when not in use
Use strictly in accordance with face piece and filter instruction
leaflet
Respiratory Protection is only effective if it is correctly
selected, fitted and worn throughout the time when the wearer
is exposed to respiratory contaminants
Face Fitting
Positive Pressure Face fit Check
Place the palm of the hand over the exhalation valve cover
and gently exhale
If the face piece bulges slightly and no air leaks between
the face and the face piece are detected, a proper fit has been
achieved
If air leakage is detected, reposition the respirator on the
face and/or re-adjust the tension of the elastic strap to eliminate
the leakage
Repeat the above face fit check until it is completed successfully
Cleaning and Storage
Remove and dispose of the the particle filters as controlled
waste
after use in a contaminated environment
Disinfect the face piece after being used in a contaminated
environment.
Rinse in fresh, warm water and air dry in a non contaminated
atmosphere
Respirator components, especially exhalation valve should be
inspected prior to each use. A respirator with any damaged or
deteriorated components should be discarded
The cleaned respirator should be stored away from contaminated
areas when not in use.
£24.95
+
Postage (£3.95 for the 1st mask then £2.95/additional
mask)
This site offers a wide range of carefully selected products that
offer protection from modern day hazards such as Avian Bird Flu,
Chemical and Biological Agents and lethal gases in smoke. We do
this through the supply of high quality gas masks including a P3
reusable respirator and other items such as bird flu safety goggles
all chosen after much research and in-depth conversation with technical
specialists and suppliers.
All the gas masks available on this site are CE marked for legitimate
sale within the EU and have therefore been graded as being of an
acceptable quality overall.
Our avian bird flu masks contain
particulate filters which protect the wearer from dusts, mists,
fumes and biological hazards such as bacteria and virus. Whilst
FFP2 level protection does offer good protection against these hazards
the UK Government's Health And Safety Executive have recommend that
FFP3 level protection be used to protect against Avian Bird Flu.
We have have found that a superior facial seal can be achieved with
the P3 reusable respirator. For a full explanation of these bird
flu protection products please view the Bird
Flu Protection page of this website. Our bird
flu survival kit includes essential items such as hand sanitizer
and bird flu safety goggles as well as respirators as described
above.
Should you require any additional information or clarification on
any point please do not hesitate to contact
us.